HOMEABOUT USABRASIVE RESISTANT MATERIALSFABRICATION SPECIALTIESOTHER SERVICESCONTACT US
MATERIALS AND SERVICES SUPPLIED BY ARS:
ARS 460: Excellent Workable Alloy Steel Plate
ARS Hi Nickel Alloy: 3% Nickel Alloy Steel Plate
ARS Meralloy Shafting: Nickel-Chromium Alloy
ARS Meralloy TG+P: Turned Ground & Polished Nickel Chromium Alloy
Castings: High Chromium, Manganese, Chilled Iron, Alloy Steel
UHMW & Urethane: Multiple Derometers-Cross Linked
Tool Steels
High Alummina Ceramic
High Temperature Materials
Chromium Carbide Overlay
Heat Treated Threaded Rod
Turn Key Installations
Material Conversions and Upgrades
Fabrication and Machining Specialties
Complete Applications Analysis




ARS 460™
MECHANICAL PROPERTIES:
Hardness BHN
420-470
Yield Strength
175,000 PSI
Tensile Strength
220,000 PSI
Elong in 2"
14%
Reduction of Area
47%

Advantages of ARS 460:
High Strength with Ductility
Excellent Formability
Desulphurized Alloy Steel
Standard Welding Procedures
Low Hydrogen Rod
High Pressure Water Quench
Minimum Surface Scale
Through Hardened
Excellent Resistance to Wear
Oxy Acetylene or Plasma Cutting
Minimum Slag Easily Removed
Fine Grain Microstructure
Excellent Charpy Impact Properties
Machineable Using High Speed, Cobalt or Carbide Tooling

Trunion Boxes - Material ARS 460:
Selected for its high strength and excellent resistance to wear and impact. Trunion Boxes are fabricated and then lined with 1/2" thick plate, extending the life of the box and lowered maintenance costs. ARS 460 the sensible plate for cost effective solutions to fight abrasion.



ARS Hi Nickel
MECHANICAL PROPERTIES:
Hardness BHN
400-460
Yield Strength
180,000 PSI
Tensile Strength
245,000 PSI
Elong in 2"
11.4
Reduction of Area
38%

Advantages of ARS Hi Nickel:
3% Nickel Content
Meets Federal Armor Plate Specs.
400/460 Brinell Hardness
Excellent Wear Resistance
Quenched and Tempered
Provides consistent micro grain structure
Through Hardened
Consistent, predictable resistance to wear
Workable
Machineable, Weldable, using standard procedures
Formable Torch or Plasma Cut
Impact Resistant and Excellent Release Properties are realized by high Nickel and Chromium content
Applications:
Chute Liners
Target Doors
Flume Liners
Dump Grates
Truck Liners
Bucket Liners
Dozer Blades
Chipper Plates
Breaker Plates
Barge Unloader Buckets
Elevator Buckets
Sizing Screens
Muller Bottoms
Drive Sprockets
Cyclones
DeBarking Drums
Lift Plates
Transfer Chutes
Duct Work
Bins
Trunion Screens
Lifting Bales & Hooks
Ladles
Wood Chip Blow Lines
Pipe, Elbows
Mixer Liners
Clam Shell Buckets
Flights
Clinker Grates
Feeder Tables

ARS MERALLOY
MECHANICAL PROPERTIES:
Hardness BHN
270-345
Yield PSI
130-165,000 PSI
Tensile PSI
150-180,000
Elongation
15%-19%
Reduction in Area
45%-60%

Advantages of ARS Meralloy: Suggested Uses:
Fine Grain Uniform Structure
Fully Stress Relieved
Excellent Yield Relieved
Precision Ground Tolerances
Precision Straightness Tolerances
Work Harden Ability
Quenched and Tempered
Arbors
Axles
Bearings
Bolts
Bosses
Collets
Connecting Rods
Conveyor Parts
Gears
Blocks
Journals
Lead Screws
Drive Shafts
Lime Nozzles
Pinions
Pins
Push Rods
Spindles
Screws
Shafts
Sleeves
U-Bolts
Trommel Pins
Ladle Arms
Rings

Meralloy Tubing - Joined to Inconell 600
These dissimilar materials were successfully 100% welded together using an argon vacuum/tigue process. The filler composite material was a stainless and tungsten combination. 400 pcs. 36'6" long are being packaged after welding, sanding and straightening by ARS's Fabrication Department.

Available Standard Sizes and Shapes:
Round, Square, Flats, Hexagon, Tubing & Plate
 
Website Designed and Hosted by Website Solutions LLC